standard housings

Standard Enclosures

Our standard product is cast from a rigid polyurethane that has proved its self extremely durable in the harshest environments, with good impact resistance and mechanical strength as well as resisting hydrolysis, and degradation from sunlight or marine organisms.

All the housings incorporate a captive seal made from a soft Silicone, this makes them capable of sealing where there is a low pressure differential and an O Ring would not be suitable, for example: shallow water, pressure compensated housings and high altitude applications.

For mounting components in the boxes, Sub Plates are available in a variety of materials. A Sub Plate would normally be fastened on pillars to the bottom of the housing, thus isolating the components from deflections of the side walls under pressure. The fasteners used are metric A4 St/Steel Cap Head Screws, unless an alternative is requested.

To return to the selection guide for Standard Housings please click here